Doorking 9070 Slide Gate Operator

The Model 9070 operator is designed to operate vehicular slide gates in residential and light-duty commercial applications only. These operators are designed so that they can easily be mounted in the front, center or rear of the gate without any costly and time consuming field modifications. In addition, the operators can be pad or post mounted to meet any installation requirements.

Self-adjusting, no maintenance magnetic limits.

Ports for plug-in loop detectors.

Two convenience outlets.

Fail-safe release (fail-secure optional).

Programming switches.

Built-in reset switch.

Built-in power On/Off switch.

Model 9070 Features

Maximum gate length 22-feet.

Maximum gate weight 500 pounds*. (*Assumes gate is on level ground, in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator.)

1/2 HP continuous-duty motor.

115 VAC, 5.4 Amps. Operator is shipped with chain brackets and 20-feet of #41 chain.

Class I and Class II applications.

Compliant with UL 325 and 991. ETL listed. (Note: To be compliant with UL 325 and industry safety guidelines, a secondary entrapment prevention device(s) is required to be installed with this gate operator. Your professional DKS system installer can provide you with more details on these devices and on current industry safety standards.)

Dimensions: 12"W x 24"H x 11.5"D